Dishwasher Installation, On the Cheap

When we bought this house, it had never had a dishwasher installed.

We figured that we could live without one for a year while the renovation work was taking place. In fact, we purchased the dishwasher when we bought the new appliances for the place right after moving in.

It's sat in the box waiting to be installed ever since.

The remodel work is progressing very slowly, as there is plenty to do outside, and I'm enjoying time with the family while it's nice out.

But we're finally sick of doing dishes by hand and using paper plates half the time to avoid having to wash dishes every day.

Plus, I'm sure we waste a lot more water washing them by hand compared to what a new dishwasher would use.

The problem is that the dishwasher will be installed on the side of the kitchen which I haven't started work on yet, so there are cabinet doors and drawers and a wide base cabinet where the dishwasher is going to go.

To make things difficult, I'm cheap. Some call it "frugal", but I will admit to being cheap. I hate to spend money on renovation stuff if I know I'll just be tearing out the work and re-doing it later.

The project: install a dishwasher while spending NO money for parts. None. I can only use parts I already have on-hand, even if it means an ugly install. It's meant as a temporary install, so I'm not aiming for "pretty". Lucky for me I have a good selection of parts on hand from previous work. Hopefully enough to pull this off.

At this point, I know I'll be re-using the dishwasher, but don't know exactly where water or electrical lines will be run. I also don't have a garbage disposal installed yet (dishwasher discharge lines typically connect to the disposal) so I'll need to tie in to the sink drain directly.

Since the lower cabinet is wider than the dishwasher needs, I plan to use a trusty saws-all to cut out the wood I don't need, and leave about 1/3 of a door on the hinges to hide the gap that used to be cabinet. It'll make more sense when I start the work and take pictures. Promise.

The drain line is easy, although I'll be installing it without an air-gap for now. When I do the work for keeps I'll put that in place. Electrical will be temporary hook-up as well - enough to make it function safely for now.

Over the next few days I'll need to go through my supplies and get everything together. I want to install the dishwasher this weekend. The only items I'm not sure how I'm going to handle yet are the splitter for the water supply and the drain line. The drain isn't high-pressure, so I'll use garden hose if needed. The supply IS high-pressure so I'm hoping I have a long enough stainless braided line.

Game on!