Monday, August 18, 2008

Happiness is a Warm Saw

I finally got plenty of work done over the weekend.

Too bad it wasn't on MY house.

My dad asked me to come up to his place and help him remove some trees. This is the second time this summer we've removed trees from his backyard and you STILL can't tell it was ever done!

There are so many trees in his small back yard that even with a dozen of 'em removed it still is fully under canopy. We've got one more cutting planned for fall, and then a couple of sessions for next spring/summer.

The biggest trees we took down over the weekend were about 7" thick at the base, so I took my small saw:



This little Homelite was my grandpa's saw a few decades ago, and it made it's way into my possession. A year ago I tried starting it for the first time in probably 10-15 years and it was a no-go. The seals were shot and it needed the attention of a professional.

Lucky for me, old saws were made to last and are usually repairable. A guy I work with does tree removal on the side, and also repairs old saws. He said he had this one running in about 20 minutes, and that with proper care it should last a lifetime. After adding gas/oil mix and bar oil I can have it started from cold in 15 seconds.

He strongly advised using more oil in the gas:oil mix on both of my gas chainsaws as well as the gas weed-eater. The way he looks at it, the worst thing I'll do is foul the plugs, but I won't have to worry about trashing the engine due to lack of lubricant. The saws and weed eater all call for 40:1, but I'm running closer to 30 or 35:1.

I do have a small problem with the small saw wanting to die instead of idle, but as long as it's being revved to cut all is well. Plus, it starts with one easy pull so it's not like I'm creating a lot of extra work for myself.

This brings me to my tip-o'-the-day: don't store your chainsaws with gas or oil in 'em. Drain the fluids and run the engine to get rid of any remaining in the lines. Old gas makes small engines run like crap, and if you let it sit long enough it won't work at all. Also, the bar oil tanks leak a ton of oil all over the place if you don't empty the tanks. At least all 3 of my saw's leak oil from the oiling system (that includes the one electric chainsaw).

(I was going to put a picture of my other gas saw, a McCullough Eager Beaver on this post, but I didn't have a picture of it and when I tried doing a Google image search for Eager Beaver I got really distracted....)