Monday, August 13, 2007
Note to Self
Old unfaced insulation itches like a mo-fo. The carpet is out of the attic, but I'll come back in a few days to remove the excess planking. It looks to be only held in with 1-2 nails per 4' length. Hopefully the Benadryl kicks in soon.
Aww, Hell No.
I started removing carpet from my attic this afternoon, since it is in the mid 70's outside and it should be tolerable if I run a box-fan to get the hot air out of the attic. I knew there was some planking in the attic, but with the carpet in place I couldn't get a good idea as to what was there. I removed one large piece of carpet and found that the PO planked a LOT more of the attic than I had expected. Plus, the planks had no spacing between them for me to check the depth of the existing insulation. I'm working on the assumption that the area between the joists under the planking is fully insulated, but I think I'm going to have to pull up a lot of the planks just to make sure. Plus, I need to install some recessed lighting in the kitchen and wouldn't be able to easily run the wiring if I leave the planks in place. I'm not really looking forward to this, but if the attic is cooled off a lot tonight it shouldn't take more than an hour to get most of the planks removed, along with the carpet. I do plan on leaving a small section of planking to get from one end of the house to the other, but since I'm not going to store anything in there other than insulation, the excess has got to go. There is about 4' of clearance between the plans and the peak of the roof. Being 6'3", I'm expecting this little adventure to suck.

By the way, the PO did have a nice way to get into the attic without going through the living area in the house. There is an access hatch in the wall of the garage. I'm not sure how safe it is as far as fire barriers go, but it's handy for getting crap (carpet and padding, for instance) in and out of the attic. There was a pulley attached to the rafters in the garage, so I just attached a small rope and it worked like a charm. Here, I've got a fan running to force as much hot air out as possible before I spend any quality time with the planks and insulation.

Hey Nate, here's your shed. I even left all the original nails in the wood for you. UPS didn't want to come pick it up for you for some reason. So much for "What can Brown do for you?"...

By the way, the PO did have a nice way to get into the attic without going through the living area in the house. There is an access hatch in the wall of the garage. I'm not sure how safe it is as far as fire barriers go, but it's handy for getting crap (carpet and padding, for instance) in and out of the attic. There was a pulley attached to the rafters in the garage, so I just attached a small rope and it worked like a charm. Here, I've got a fan running to force as much hot air out as possible before I spend any quality time with the planks and insulation.

Hey Nate, here's your shed. I even left all the original nails in the wood for you. UPS didn't want to come pick it up for you for some reason. So much for "What can Brown do for you?"...
Saturday, August 11, 2007
I Love the Smell of Sawdust in the Afternoon. It Smells Like. . . . Victory.
After a week of hauling the old shingles, I'm finally done with that project. The roof still needs a little attention at the gutters and I still need to install the light tube, but the heavy work is done (finally). It still surprises me how much room the old shingles took up in the 20 yard dumpster. It's almost half-filled already! The trailer in the dumpster is what I used to move the shingles from the yard to the dumpster. Every effort was made to keep the debris as far forward and stacked as high as possible so I wouldn't be walking over nails. I also wanted to make sure I didn't waste room since I don't want to rent another dumpster any time soon. With the shingles done, it was time to destroy that crappy old shed.

Nate, these pictures are for you! The wood siding was in decent shape, but there was a lot of rot because the builder of this masterpiece didn't use pressure-treated wood. I started with the sledge hammer and knocked the siding off of two sides. The area with missing framing was heavily rotted and took almost no effort to remove. I was going to cut the shed into pieces, but found it was easier to just dismantle it with the sledge.

Here's why you should use pressure treated wood for the sill plates. The entire corner was rotted away and filled with bugs. It didn't help that the roof leaked heavily. I was surprised with how well the shed was built, but that they went stupid and used a flat roof and a swing-in door. The more I look at it, the more I think this wasn't really a shed, but more of a garden shed for potting plants. Size-wise, this shed would have been useless for lawnmowers or other lawn-care tools.

Did I mention the roof leaked? Black isn't a good color for roof supports. This beam was rotted, as were the ends of the roof decking which were above it.

Here, most of the roof has been taken apart except for the last bit which was above the shed door. The roof was covered with 4' x 4' shingles. Well, they weren't really shingles, but were made from the same material. There were plenty of nails holding the "shingles" in place, but none of them were caulked or covered in tar. The seams (and there were a LOT of seams on this roof) were also not caulked or tarred. Gee, I wonder why it leaked? Bad choice of roof design, no slope to the roof, and poor execution. This might have worked if they had used a one-piece rubber membrane of some type or at least slopped the whole roof with tar.

Nate, these pictures are for you! The wood siding was in decent shape, but there was a lot of rot because the builder of this masterpiece didn't use pressure-treated wood. I started with the sledge hammer and knocked the siding off of two sides. The area with missing framing was heavily rotted and took almost no effort to remove. I was going to cut the shed into pieces, but found it was easier to just dismantle it with the sledge.

Here's why you should use pressure treated wood for the sill plates. The entire corner was rotted away and filled with bugs. It didn't help that the roof leaked heavily. I was surprised with how well the shed was built, but that they went stupid and used a flat roof and a swing-in door. The more I look at it, the more I think this wasn't really a shed, but more of a garden shed for potting plants. Size-wise, this shed would have been useless for lawnmowers or other lawn-care tools.

Did I mention the roof leaked? Black isn't a good color for roof supports. This beam was rotted, as were the ends of the roof decking which were above it.

Here, most of the roof has been taken apart except for the last bit which was above the shed door. The roof was covered with 4' x 4' shingles. Well, they weren't really shingles, but were made from the same material. There were plenty of nails holding the "shingles" in place, but none of them were caulked or covered in tar. The seams (and there were a LOT of seams on this roof) were also not caulked or tarred. Gee, I wonder why it leaked? Bad choice of roof design, no slope to the roof, and poor execution. This might have worked if they had used a one-piece rubber membrane of some type or at least slopped the whole roof with tar.
Friday, August 10, 2007
You Will be the First Against the Wall When the Revolution Comes
Days later, and I'm still schleping shingles from the yard into the dumpster. Who'd have known there were so many shingles on one roof?! The front, back, and one side are 100% done, leaving one small side to do tomorrow. The 20 yard dumpster is closing in on being 1/2 full - it's pretty much one solid mass of shingles now. If the old shingles weigh as much as the new ones, I'll probably end up with around 10,000 pounds of shingles in there (based on the weight of the 71 bundles which were just installed, coming in at around 5,400 pounds). The more time I spend in the backyard removing shingles (and lots and lots and lots of nails) the more I can't wait to get rid of the old shed which came with the house. It's got a swing-in door, meaning that about 1/3 of the room inside is wasted since you need to leave room for the door to open. It's also got a flat roof, which is pretty much the polar-opposite of a good idea here in Wisconsin. The 2 x 4 roof framing is rotting from years of leaks, and the thing is painted a wonderful shade of red which matches absolutely nothing else on our property. Well, that burning bush in front of it matches the shed for a few weeks a year, but that's not a good enough reason to keep it. After the shingles are all loaded up and we take a last sweep for nails, I'm going to break out Mr. Reciprocating Saw and cut that fvcker up. We'll be stuck with the old concrete pad from it until we get money to replace the patio, but at least we won't have an ugly shed 15' from the back door. Oh yeah, it was built 15' from the house instead of way back in the corner of the yard like normal people would do. When I look out one of our bedroom windows, the side of the shed is about 75% of my view. Nice....
Sunday, August 5, 2007
Soft hands. And a manicure. Never done a hard day's work in your life, have you?
From Trading Places, by the way.
I am one with the pitchfork. Unfortunately, I'll be one with it for the next few weeks. Couldn't somebody design a lightweight 25 year asphalt and gravel shingle which will hold up against snow, ice, and summer sun? Is that too much to ask? I think I'm getting blisters on my blisters. At least today was overcast, which kept the temps around 80. Pretty humid, thanks to yesterday's rain, but since we need rain so much right now I won't complain more than I already do.
That rolling magnet has so far been worth every penny I paid. My son has been "playing" with it and has found hundreds and hundreds of nails so far. My shoe found two, but luckily they were short nails and my delicate foot is safe. I'm probably about 1/3 done with the clean-up and expect to bleed before this is over. The 20 yard dumpster is about 1/4 full - I'm just hoping I have enough room left to throw out the crappy old shed, the old cement laundry sink, and all the human heads I've been collecting for years. I think I've finally outgrown that obsession.
I am one with the pitchfork. Unfortunately, I'll be one with it for the next few weeks. Couldn't somebody design a lightweight 25 year asphalt and gravel shingle which will hold up against snow, ice, and summer sun? Is that too much to ask? I think I'm getting blisters on my blisters. At least today was overcast, which kept the temps around 80. Pretty humid, thanks to yesterday's rain, but since we need rain so much right now I won't complain more than I already do.
That rolling magnet has so far been worth every penny I paid. My son has been "playing" with it and has found hundreds and hundreds of nails so far. My shoe found two, but luckily they were short nails and my delicate foot is safe. I'm probably about 1/3 done with the clean-up and expect to bleed before this is over. The 20 yard dumpster is about 1/4 full - I'm just hoping I have enough room left to throw out the crappy old shed, the old cement laundry sink, and all the human heads I've been collecting for years. I think I've finally outgrown that obsession.
Saturday, August 4, 2007
WTF Moment of the Day
Alright, so the roof is done (except for cleanup, which will probably go on for a couple of weeks - yay...). Just in time, as we're getting some of the only rain we've seen in over a month. Not hard rain, but enough to wet things down a bit. I figure it's a good time to check things out in the attic, although a real hard-rain would be the best trial-by-fire for it. Below is typical of the 45 year old decking - nice and solid. I didn't mention it before, but there was absolutely no rot or noticeable water damage found during the roofing.

The previous owners, who had lived here at least 30 years, installed some wood decking which goes from the opening into the attic all the way to the garage where there is an access hatch as well. You can barely see it on the wall to the left. This is the first time I got a look into the attic and it was "interesting". I had wondered about the venting and where the stove and bathroom vents exited the house, which I now know. That's not what was "interesting", though. The "insulation" is what I'm referring to.

I don't know if it's "Yankee Ingenuity", just plain cheap, or the first signs of Alzheimer's, but the previous owners used old carpet and padding as insulation. Seriously, WTF?!? Over the living room is this egg-crate style padding surrounded by REAL pink insulation. Yeah, that'll work well.

Even higher on the Lame-o-Meter is this old carpet and pad which matches the carpet in the hallway and the bedroom we tore carpet out of. What I really like is how it has compressed the real insulation, thus ruining what little R-value it originally had. Most of the attic has at most 6-8" of insulation, nowhere near enough for Wisconsin. I had planned to blow in some insulation this fall, but didn't know I was going to have to remove carpeting from my freaking attic before I did so.

Before anybody asks, my home inspector did mention carpeting in the attic, but I thought me meant that they rolled some up and stored it in the attic, not that they actually tried to use it for insulation. I did look briefly while he was up there checking out the decking, but I didn't want to climb up there as I was still in my work clothes. I'm really interested in seeing how much easier the house is to heat & cool once this is done correctly. I'll have to check out the venting around the soffits when I do this to help the airflow. That should be loads of fun, so I'll wait until cool weather before I do it.

The previous owners, who had lived here at least 30 years, installed some wood decking which goes from the opening into the attic all the way to the garage where there is an access hatch as well. You can barely see it on the wall to the left. This is the first time I got a look into the attic and it was "interesting". I had wondered about the venting and where the stove and bathroom vents exited the house, which I now know. That's not what was "interesting", though. The "insulation" is what I'm referring to.

I don't know if it's "Yankee Ingenuity", just plain cheap, or the first signs of Alzheimer's, but the previous owners used old carpet and padding as insulation. Seriously, WTF?!? Over the living room is this egg-crate style padding surrounded by REAL pink insulation. Yeah, that'll work well.

Even higher on the Lame-o-Meter is this old carpet and pad which matches the carpet in the hallway and the bedroom we tore carpet out of. What I really like is how it has compressed the real insulation, thus ruining what little R-value it originally had. Most of the attic has at most 6-8" of insulation, nowhere near enough for Wisconsin. I had planned to blow in some insulation this fall, but didn't know I was going to have to remove carpeting from my freaking attic before I did so.

Before anybody asks, my home inspector did mention carpeting in the attic, but I thought me meant that they rolled some up and stored it in the attic, not that they actually tried to use it for insulation. I did look briefly while he was up there checking out the decking, but I didn't want to climb up there as I was still in my work clothes. I'm really interested in seeing how much easier the house is to heat & cool once this is done correctly. I'll have to check out the venting around the soffits when I do this to help the airflow. That should be loads of fun, so I'll wait until cool weather before I do it.
Roofing is Done, and Now Cleanup Sucks
By noon on day 4, the roof was done. My mad-purchazing-skillz served me well - I was only short 11 bundles of shingles (I was trying to get away without having any extra, but that backfired a little bit) and only used one of the two 20' ridge vents. I didn't see any reason in using the other roll, as I could have only used about 5' of it and would have wasted the other 15'. Might as well return it and get the $50 back. Most of my running for stuff on this job was for stuff like tubes of tar, ice, Gator Ade, etc. The roof is done, but that doesn't mean my work is done. Now comes the el-sucko job of clean-up. Usually people put down tarps to catch the debris from the roof, but since there were only two guys working (and our tarps suck), I had the debris dropped directly on the ground. It is easier to pick up with a pitchfork this way, though. My only concern will be nails which the rolling magnet doesn't get, I figure I'd have those either-way, so I'm going to hope for the best and pay the kids to use the magnet every few days.

Ah, sweet, sweet, ridge-vent goodness, how I've looked forward to having you. 20' of Owens Corning with the top shingled.

From the garage side of the house, the last side to be done.

Remember how I said that the previous colors on the roof might have faded a little? Well, make that "a LOT". I found this little gem mostly protected from the sun, and it shows that the second layer of shingles was actually RED! How freakin' ugly can you get! Red roof, brown and white trim, and tan brick. Yeah, that'll look good...

Ah, sweet, sweet, ridge-vent goodness, how I've looked forward to having you. 20' of Owens Corning with the top shingled.

From the garage side of the house, the last side to be done.

Remember how I said that the previous colors on the roof might have faded a little? Well, make that "a LOT". I found this little gem mostly protected from the sun, and it shows that the second layer of shingles was actually RED! How freakin' ugly can you get! Red roof, brown and white trim, and tan brick. Yeah, that'll look good...
Subscribe to:
Posts (Atom)
